XB-6266MB reads 1D and 2D barcodes. It is able to work with mobile devices (iPhone, iPad, IOS, Android, Windows) using Bluetooth.
User Manual: Please download the XB-6266MB_User Manual for the configuration QR codes. A copy of the User Manual is in the barcode scanner box.
Connection modes
Please ensure that the barcode scanner is fully charged before using it.
You can use any of the two connection modes for XB-6266MB.
Using wireless mode with USB dongle
- Connect the USB receiver (dongle) to the USB port of the computer.
- Ensure that Windows can detect the USB receiver in Device Manager.
It should appear as a HID Keyboard Device under Keyboards. - Turn on the barcode scanner by pressing the trigger.
- The USB receiver will attempt to pair with the barcode scanner.
- When pairing is successful, both the USB receiver and the barcode scanner will show a steady blue light.
- Open Notepad and attempt to scan a barcode with the barcode scanner. The scanned barcode will appear in Notepad.
Please perform the following steps to pair the barcode scanner with the USB receiver.
- Disconnect the USB receiver from the USB port of the computer.
- Scan the QR codes: Factory Default, RF Setting, Bluetooth Mode in this sequence with the barcode scanner.
- Scan Disconnect and Connect barcodes at the underside of the USB dongle.
- Connect the USB receiver to the USB port of the computer. The USB receiver will attempt to pair with the barcode scanner.
- When pairing is successful, both the USB receiver and the barcode scanner will show a steady purple light.
Using bluetooth mode
- Turn on the barcode scanner by pressing the trigger.
- If the barcode scanner has already paired successfully with a mobile device (iPhone, iPad, IOS, Android, Windows, Mac OS), the device will attempt to pair with the barcode scanner.
- When pairing is successful, the barcode scanner will show a steady purple light.
- Open a Text Editor in the mobile device and attempt to scan a barcode with the barcode scanner. The scanned barcode will appear in the mobile device.
The barcode scanner will auto re-pair with the mobile device that it has paired successfully upon start up.
You do not need to pair the barcode scanner each time you start up the barcode scanner.
- Scan the QR codes: Factory Default, RF Setting, Bluetooth Mode in this sequence with the barcode scanner.
- Scan the Connect to mobile device QR code.
- Access the Bluetooth settings of the mobile device to search for the barcode scanner “Bluetooth barcode scanner” and select pair to pair with the barcode scanner.
- When pairing is successful, the barcode scanner will show a steady purple light.
Configuration
The barcode scanner has the following scan modes.
- Manual (default): Press the trigger of the barcode scanner
- Continuous mode: The barcode scanner scans continuously.
- Auto-sense mode: The barcode scanner detects the presence of a barcode and scans automatically.
Troubleshooting
The barcode scanner has a default “Sleep time” to conserve battery power. It will automatically power off after the sleep time. Please refer to the “Sleep Time” section above to disable sleep or configure a different sleep time duration.
If the barcode scanner turns off immediately after it is turned on, it is an indication of low battery. Please charge the barcode scanner with the power adapter provided.
The barcode scanner has an indicator light displaying different status.
- Red light: The barcode scanner is turned on.
- Steady purple light: The barcode scanner is paired successfully.
To power on the barcode scanner, press and hold the trigger.
To power off the barcode scanner, press and hold the trigger for 20 seconds. Once a beep is heard, the barcode scanner is turned off.
If the barcode scanner is unable to pair with a mobile device that it has been paired previously, please perform the following steps.
- Turn off both the mobile device and the barcode scanner.
- Turn on both devices again.
- This is to re-activate the Bluetooth connectivity of both devices.
- Make sure that the barcode scanner is configured to work in Wireless mode.
- Unplug the USB dongle and plug it to another USB port.
- Check the indicator lights on the USB dongle. If it is steady purple, it has established a connection with the barcode scanner.
- The Windows “USB selective suspend” feature may have suspended the USB port to save power. Please disable this feature using the method here.